Commissioning - Siemens SIPROCESS GA700 Operating Instructions Manual

Commissioning

General
Feeding of gases with flammable components
A device in the standard version must not be operated in hazardous areas. The supply of
gases with flammable components at concentrations above the lower explosion limit (LEL)
may only be carried out in devices with pipes.
Protection against incorrect use of the rack-mounted device
Use the rack-mounted device only within the voltage limits specified on the nameplate.
Note
Ambient temperature
Ensure that the ambient temperature is within the permissible range during operation, see
Technical specifications (Page 63).
Pressure correction
The analyzer modules feature an internal pressure sensor for correcting the influence of
pressure on the measured value.
In the case of OXYMAT 7, the pressure sensor is connected with the sample gas path and
therefore always measures the current sample gas pressure.
Rack-mounted device
Operating Instructions, 01/2013, A5E31874006-01
WARNING
WARNING
9
49