Siemens SIPROCESS GA700 Operating Instructions Manual page 60

Maintenance and service
10.4 Replacing the processing unit
Re-commissioning the device
● No operating, user or factory data is saved on the basic device. The new PU is provided
● Restart the device with the analyzer modules installed last.
● The AMs are recognized as new when the device is started. Each AM retains its
● The configuration of the basic device (operating data) is restored from the memory of
● For further steps, please contact the service department.
See also
Technical support (Page 76)
60
with the most recent firmware.
parameter settings.
analyzer module AM1.
Operating Instructions, 01/2013, A5E31874006-01
Rack-mounted device