Connecting
7.2 Electrical connection of the power supply
1. Connect the wires of the connecting cable to the appliance plug
Note
Tightening the screws
Tighten the screws in the appliance plug with a torque of
• 0.5 Nm to the connecting terminals,
• 0.3 Nm to the cable terminals (strain relief) and the connector housing.
These values apply to the optionally ordered power connector, see Spare parts list for
rack-mounted housing (Page 73).
2. Connect the appliance plug
40
power supply and PE conductor connections are correct!
3
2
1
①
Power supply unit
③
Appliance plug
Figure 7-1
Electrical connection
③
to the power supply unit
②
Connection of equipotential bonding
Operating Instructions, 01/2013, A5E31874006-01
③
. Ensure that the
①
.
Rack-mounted device