Description
3.2 Essential characteristics
3.2
Essential characteristics
3.2.1
OXYMAT 7
● Depending on the reference gas, the physical zero point can be set between 0% and
● Measuring range identification
● Electrically isolated measured value output 0/2/4 to 20 mA (also inverted)
● Storage of measured values possible during calibration
● Short response time
● Low long-term drift
● Internal pressure sensor for correction of pressure variations in sample gas in the range
● Monitoring of sample gas and reference gas (option)
● Smallest measuring spans (up to 0.5% O
● Vibration compensation as option
● Suitable for use with corrosive sample gases
● Hardware adapted to application
18
100% oxygen
from 500 to 2500 hPa (absolute)
) possible
2
Operating Instructions, 01/2013, A5E31874006-01
Rack-mounted device