Table of Contents
Advertisement
Intel® Server System M20NTP1UR - System Integration and Service Guide
2.2
Air Duct Removal and Installation
Required Tools and Supplies
Anti-static wrist strap and conductive workbench pad (recommended)
•
2.2.1
Air Duct Removal
1. Remove the system top cover (see
2. Remove the air duct (See
Lift the air duct straight up and away from the server system.
•
2.2.2
Air Duct Installation
To maintain proper air flow within the system, the air duct must be in place when the system is operating.
1. Ensure cable channels on each side of the air duct are oriented towards the front of the system
2. Install the air duct (See
Lower the air duct into the system, ensuring that all cables are clear from the installation area.
•
The air duct is properly installed when it sits flat and is securely in place
•
20
Section
2.1.1).
Figure
6)
Figure 6. Air Duct Removal
Figure
7)
Figure 7. Air Duct Installation
Advertisement
Table of Contents
