Air Duct Replacement (Air Cooled Compute Modules Only); Air Duct Removal; Air Duct Installation; Figure 46. Removing The Air Duct - Intel S9200WK Series Setup And Service Manual

Intel® Server System S9200WK Product Family Setup and Service Guide
4.8

Air Duct Replacement (Air Cooled Compute Modules Only)

4.8.1

Air Duct Removal

1. Remove the compute module to be serviced from the server chassis (see Section 4.2.1).
2. Press the latches located on both sides of the compute module inwards (see Letter A).
3. Carefully lift the front edge of the air duct away from the compute module (see Letter B).
4. Pull the air duct away from the compute module (see Letter C).
4.8.2

Air Duct Installation

1. Align and attach the hinge slots located on the back end of the air duct with the hinge posts located
on both sides of the compute module (see Letter A).
2. Lower the air duct down until both the left and right side latches snap into place (see Letter B).
46

Figure 46. Removing the air duct

Figure 47. Installing the air duct