Table of Contents
Advertisement
Intel® Server System M20NTP1UR - System Integration and Service Guide
2.4
Memory Module Installation
Required Tools and Supplies
Anti-static wrist strap and conductive workbench pad (recommended)
•
Note: See
Appendix C
2.4.1
DIMM Installation
1. Remove the DIMM blank from the desired memory slot (See
Open the ejection tabs at both ends of the selected memory slot to lift the DIMM blank from
•
the slot (see Letter "A").
Carefully remove the DIMM Blank from the system (see Letter "B").
•
Note: DIMM Blanks should only be removed when being replaced with a memory module
2. Carefully unpack the memory module, taking care to only handle the device by its outer edges.
3. Install the memory module to the server board (See
•
Ensure that the ejection tabs at both ends of the memory slot are pushed outward to the open
position (see Letter "A").
26
for general memory population rules.
Figure 18. DIMM Blank Removal
Figure 19. Memory Module Installation
Figure 18)
Figure
19)
Advertisement
Table of Contents
