Table of Contents
Advertisement
Intel® Server System M20NTP1UR - System Integration and Service Guide
3.
System Options / Accessory Kit Installation
This chapter provides instructions for the integration of system options and other Intel accessories. If your
integrated Intel server system did not come preinstalled with processors or memory, installation procedures
for these components can be found in
Before You Begin
Before integration of any system components, review all the safety and ESD precautions found in the Safety
Warnings section at the beginning of this document.
System Reference
In the following procedures, all references to left, right, front, top, and bottom assume the reader is facing
the front of the server chassis.
Instruction Format
Each procedure described in this chapter follows an illustration first format. This format gives the reader the
option to follow a quicker path to component integration by first seeing an illustration of the intended
procedure. If necessary, the reader can then follow the step-by-step instructions that accompany each
procedure.
3.1
System Top Cover Removal / Installation
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
Phillips* head screwdriver #1
•
3.1.1
System Top Cover Removal
Removal of the top cover is necessary when installing or replacing any system component within the server
chassis.
A new system ships from the factory with the top cover secured to the chassis using three screws. These
screws may or may not be present if the system was previously received and configured by others.
1. Ensure the system is powered off and that all cables are removed from the system back panel
2. (If present) Remove the three top cover screws (See
28
Chapter
2.
Figure 20. System Top Cover Screws
Figure
20)
Advertisement
Table of Contents
