Advertisement
Step 14: Re-install the small black helical gear
Locate and re-install the small black helical gear (F)
over the metal post (Figure 14).
Step 15: Re-install the main black drive gear
Locate and re-install the black drive gear (E) over the
small, white plastic post (Figure 15).
Step 15: Re-install the white drive gear
Locate and re-install the white drive gear (D) into its
original position, on the plastic post with the extended
part of the gear facing upward, next to the black drive
gear (Figure 16).
TonerRefillKits.com
9am - 5pm ET Mon - Fri
800.527.3712 or 352.343.7533
© 1995-2016 ReChargX, EmptyX, TonerRefillKits, TonerRefillKits.com, the TonerRefillKits logo, the
ReChargX and EmptyX logos are trademarks owned by TonerRefillkits.com, LLC. All rights reserved.
A
Figure 14: Re-installing the small black helical gear
E
A
Figure 15: Re-installing the black drive gear
D
Figure 16: Re-installing the white drive gear
F
ReChargX™ RX417XX
V1.0 - 2016.09.28
Page 11 of 14
Advertisement
