Advertisement
Preparing the TN starter, TN820, TN850, or TN880
Step 8a: Remove the reset spring
Remove the reset spring (A) (Figure 8-1).
A spring is not found on the TN starter cartridge.
Step 8b: Remove the actuator gear
With the reset spring removed, we will now remove
the white actuator gear (B), exposing the remaining
gears and toner hopper plug (Figure 8-2).
Step 8c: Remove the reset gear
With the actuator gear removed, we will now remove
the reset gear (C) from the gear train (Figure 8-3).
Note: The reset gear may vary in color and is not
found on the TN starter cartridge.
TonerRefillKits.com
9am - 5pm ET Mon - Fri
800.527.3712 or 352.343.7533
cartridge for refilling and resetting
© 1995-2016 ReChargX, EmptyX, TonerRefillKits, TonerRefillKits.com, the TonerRefillKits logo, the
ReChargX and EmptyX logos are trademarks owned by TonerRefillkits.com, LLC. All rights reserved.
A
Figure 8-1: Removing the spring (on models TN820 and TN850)
Figure 8-2: Removing the actuator gear
Figure 8-3: Removing the reset gear (on the TN820 &TN850)
A
B
C
ReChargX™ RX417XX
V1.0 - 2016.09.28
Page 6 of 14
Advertisement
