Record Format - Emerson PACSystems RX3i User Manual

User Manual
GFK-2949E
mComreq_Setup [71]
5.9.2

Record Format

The Point Push Record Format consists first of a 3-word Header Section and a 13-word
Record Section. The Record Section may be repeated up to eight times. Each iteration is
concatenated to the preceding Record Section.
Header Section of the Record Format
Index
[000]
[001]
[002]
Note:
Record Section (may repeated up to 8 times)
Figure 28
Configuration of IEC-104 Server Parameter
0
Value
1237
1 ... 65534
1 ... 8
While the Point Push interface is operating, it continues to modify the header section. Note
that it takes multiple scans to accomplish a Point Push.
Memory Address Value
1-Based, high word
High word only used for accessing %W memory
above 65535
Description
Specific value the EIS001 will look for to start the
record
A counter or changed variable that will signal the
EIS001 that there is new data to be processed.
Number of Record Sections to process
Chapter 5
Dec 2020
54