Rx3I Iec 104 Server Specifications And Restrictions; Adsu Supported In General Interrogation; Adsu Supported Without Time Tag And Rbe - Emerson PACSystems RX3i User Manual

User Manual
GFK-2949E
1.7 RX3i IEC 104 Server Specifications and
Restrictions
The following tables document the IEC 104 Server capabilities of the EIS001 module. Refer
to the IEC 104 standard for details.
Interrogation Types
General
RBE
1.7.1

ADSU Supported in General Interrogation

ADSU
Mnemonic
M_SP_NA_1
M_DP_NA_1
M_ST_NA_1
M_BO_NA_1
M_ME_NA_1
M_ME_NB_1
M_ME_NC_1
M_EP_TB_1
M_EP_TC_1
1.7.2

ADSU Supported without Time Tag and RBE

ADSU supported without time tag, and Report by Exception (RBE).
Mnemonic
M_ME_NC_1
2
For definition of ADSU, refer to Glossary.
Introduction
Description
General Interrogation is a full request of all point data on the Server
from the client.
Whenever a point changes state, an exception report is sent to the
Client of this event. Refer to Report by Exception Shutter Time
mComreq_Setup [12] in
Parameters for Filter
The IEC 104 Server does not buffer events, so a constant connection
is required in order to receive a report.
2 supported in General Interrogation
Number
1
3
5
7
9
11
13
18
19
Number
13
Times for details.
Description
Single-point information
Double-point information
Step position information
Bit string of 32-bit
Measured value, normalized value
Measured value, scaled value
Measured value, scaled value (Short Float)
Packed start events of protection equipment with time tag
Packed output circuit information of protection equipment
with time tag
Description
Measured value, scaled value (Short Float) without time
tag
Chapter 1
Dec 2020
7