Day Program - Wolf RM-2 Installation And Operating Instructions Manual

Appendix
10.5.2

Day program

Set time program for one day. Use the arrow keys to switch
4$
between switching times (1, ON; 1, OFF;...3, OFF). The currently
selected switching time will flash. Use the + or - key to switch to
edit mode for the hour. Use the waste bin symbol to delete the
switching time (ON + OFF!).
Hour edit mode. Use the + and - keys to set the hour. The hour
4%
will flash. Use the tick key to apply the change or the Back key to
discard the change.
Minutes edit mode. Use the + and - keys to set the minutes. The
4^
minutes will flash. Use the tick key to apply the change or the
Back key to discard the change.
Delete switching time. Use the tick key to delete the displayed
4&
block or the Back key to keep it.
3066510_202108 WOLF GmbH | 53