Wolf RM-2 Installation And Operating Instructions Manual page 18

Commissioning
Fig. 5.2
Fig. 5.3
Pairing failed
"Pairing failed" will be displayed if the units fail to pair. Restart the
module by removing and replacing the batteries or disconnecting and
reconnecting the power supply. This will reactivate pairing mode for 2
minutes.
Fig. 5.4
Delete paired connection
A reset
connection with a Base Wireless.
This will remove all of the data from the device!
18 | WOLF GmbH
PAIR OK display
FW version display
Pairing failed display
(see page 22, para.: 6.2)
pa82
8008 . . .
8100 . : . .
8888 . . . . : . :
pa82
8008 . . .
is the only way to delete a paired
3066510_202108