Remote Control Functions; Set Value Correction; Program Selection - Wolf RM-2 Installation And Operating Instructions Manual

Remote control functions

7 Remote control functions
7.1

Set value correction

► Press
► Set value correction flashes
► The value can be changed with the
► Press
► Press
automatically if not used for one minute (RM-2 Wireless: 30
seconds).
7.2

Program selection

► Press
► Select the desired program with
► Press
► Press
automatically if not used for one minute (RM-2 Wireless: 30
seconds).
Symbol Function
26 | WOLF GmbH
keys in the standard display
+ + - -
to confirm
to cancel. The RM-2 will also return to the menu
key in the standard display
to confirm
to cancel. The RM-2 will also return to the menu
Standby: Burner and heating circulation pump(s) off, frost
protection ensured
Automatic mode: Heating system uses the time program
(1, 2 or 3) stored in the system controller, applies for both
heating and cooling
Party mode: Permanent heating mode with predefined
duration (15 min to 99 h)
Summer mode (heating off), frost protection ensured
keys
+ + - -
keys
+ + - -
3066510_202108