Program Selection - Remote Control - Wolf RM-2 Installation And Operating Instructions Manual

Appendix
10.2.4

Program selection - remote control

Program selection - remote control. Use the + and - keys to switch
1$
between program selections. The selected value will flash. Use
the tick key to confirm the program selection or the Back key to
discard your changes.
Program selection - party duration. If you select this program, you
1*
have to set how long it will remain active. You can do this using
the + and - keys. The value you have selected will flash. Use the
tick key to confirm or the Back key to cancel.
Program selection - party active. Identical options to standard
1(
view
temperature. Program symbol for Party mode flashes when
active. You can exit Party mode by selecting a different program.
The unit will also exit Party mode automatically after the specified
time has passed.
3066510_202108
. The remaining time is displayed under the room
1!
WOLF GmbH | 45