Safety; Intended Use; Incorrect Use - Wolf RM-2 Installation And Operating Instructions Manual

Safety

2 Safety
Work must be performed by a contractor.
► Only qualified electricians are permitted to work on electrical
components in accordance with VDE.
2.1

Intended use

The modules are for use exclusively in conjunction with WOLF
heating and ventilation units and WOLF accessories.
The modules can be used to control a heating and/or ventilation
system and configure specific parameters or as a remote control for
a heating or mixing circuit.
Intended use also includes observing the operating instructions and
all other applicable documents.
Please note:
– The RM-2 / RM-2 Wireless acts as a room controller when
there is no other controller (BM-2/BM) in the heating/ventilation
appliance.
– The RM-2 / RM-2 Wireless acts as a remote control of a heating
and/or mixing circuit if it detects a different controller (BM-2/BM)
in the system.
i
2.2

Incorrect use

Any use other than the intended use is not permissible. Any other
use or changes to the product at any time including during assembly
and installation invalidate all warranty claims. The user has sole
liability for such use.
This appliance is not intended to be operated by persons (including
children) with restricted physical, sensory or mental capacities or
who lack the necessary experience and/or knowledge, unless they
are supervised by a person responsible for their safety or have
received instructions on how to use the appliance from this person.
08 | WOLF GmbH
The touch fields will not work properly if your hands
are wet or if you are wearing gloves.
3066510_202108