Program Selector; Temperature Selection - Heating Mode; Status Display - Wolf ART Installation And Operating Instrictions

Program selector / heating temp. selection mode / status display
Program selector (l.h. rotary selector)
Important: For gas fired boilers with pro-
gram
selector, this must be set to
Operating Program
mode display
Standby
Summer
mode
Winter
mode
q
B
q
B i
Heating mode temp. selection (r.h. rotary selector)
Turning the selector changes the display from
current room temperature to set room
temperature.
Then you can change the desired room
temperature for heating mode. If no change is
made after more than 2 s, the display will again
show the current room temperature.
Status (display)
Heating mode active
C
Economy mode active
DHW loading or DHW QuickStart
enabled
Central heating OFF (frost protection)
i
and DHW loading or DHW QuickStart
OFF
Central
heating
Central heating OFF / Central heating OFF /
Frost protection Frost protection
Central heating OFF /
Frost protection
Economy mode
Heating mode
Heating or economy mode
C
acc. to the day program
Heating mode or central
heating OFF acc. to the
day program
C
.
Domestic hot water
Boiler
DHW loading OFF,
DHW cylinder frost
protection ensured
DHW cylinder loading
acc. to the day program
DHW loading OFF,
DHW cylinder frost
protection ensured
Enable DHW loading
DHW cylinder loading
acc. to the day program
DHW cylinder loading
acc. to day program
C
i
q B i
q
B C
ART program selector
i
Domestic hot water
Combination boiler
DHW QuickStart
OFF
DHW QuickStart acc.
to the day program
Temperature selection –
heating mode
Arrows displaying the current
operating status
7