Backup Of Configuration - Siemens MOBILETT XP Digital Installation And Startup

52
- 5 - Restore the complete hard drive (c:)
- 6 - Use GHOST interactive
- E - Exit
•
Select "1" - Back up the complete hard drive (c: + d:)
•
Remove the CD from the DVD/CD RW drive of the CXDI PC.
•
Restart the MOBILETT XP Digital and perform the "Backup of Configuration" as de-
scribed below.

Backup of Configuration

The "Backup of Configuration" includes all configuration settings, organ programs, log
files, and images from the external storage and has to be performed following start-up of
the MOBILETT XP Digital at the customer site.
The imaging system service tool is used to back up all relevant data to the D:\_Siemens_
folder. This folder is written to CD using Windows XP Explorer and stored as a backup
CD.
Prerequisites
The system is completely installed and configured according to customer specifications.
All checks have been successfully completed.
At least one blank writable CD is available.
Before backup, delete all test exposures from "external storage."
The CXDI PC is accessible (see "Backup of hard disks" earlier).
The MOBILETT XP Digital is switched on and the application has been launched properly.
Procedure
Perform the following steps from the application:
•
Select SYSTEM/ CONFIGURATION/ ADMINISTRATOR SETUP/ SERVICE TOOL.
•
Enter the administrator password and confirm with "OK".
•
Select "Copy files to _Siemens_" from the SERVICE TOOL menu.
•
Select "START".
•
Confirm with "OK".
MOBILETT XP Digital
Follow the on-screen instructions
The backup completion is displayed
See password list.
Enter the service password (see password list)
All necessary files are copied to the "_Siemens_" directory. Existing data is over-
written.
SPR8-230.814.30.03.02
11.05
Page 52 of 70
CS SD 24
Backup
0
Siemens AG
Medical Solutions