Chapter 2 System Configuration; Overall System Configuration - Mitsubishi Electric MELSEC-L Series User Manual

CHAPTER 2
A system configuration in the case of using data logging is shown below.
2.1

Overall System Configuration

An overall system configuration in the case of using data logging is shown below.
SD memory card
(sold separately, required)
LCPU
SD memory card SD memory card
(sold separately, required) (sold separately, required)
For connection to the CPU module, refer to
22
SYSTEM CONFIGURATION
LCPU
Ethernet, CC-Link, or C24
LCPU LCPU
SD memory card
(sold separately, required)
Connection from USB or serial port
Page 24, Section 2.1.2
(
Connection from interface board
Page 27, Section 2.1.3
(
Configurations
(LCPU Logging Configuration Tool)
Display
Connection via network
(
Page 28, Section 2.2.
)
)
Configuration tool
Viewer tool
(GX LogViewer)
Personal computer
Page 24, Section 2.1.2
)