8.3.4
Reading the logging setting from the SD memory card
Read the data logging setting written on the SD memory card in the personal computer.
(1) Operating procedure
1.
Install the SD memory card in the personal computer.
2.
Open the "Read Logging Setting from SD Memory Card" dialog box.
[Project]
3.
Select a drive to read from.
4.
Select a setting item to read.
5.
Click the
If some data currently exist in the configuration tool before reading, the common settings and the setting data with the same
setting No. will be overwritten. Data other than the above will be held in the configuration tool. Because of this, the data to be
read out may not match the data read out.
90
[Read Logging Setting from SD Memory Card]
button.