Auto Logging Setting - Mitsubishi Electric MELSEC-L Series User Manual

8.5.1

Auto logging setting

Configure the settings to perform the auto logging (
(1) Operating procedure
Perform the following.
[LCPU] on the edit item tree
(2) Setting screen
(3) Setting items
Item
Enable the auto logging function
Auto logging terminate condition
Data logging stop
Timer
Elapsed time
114
[Common setting]
For auto logging using an SD memory card, select this.
Set whether or not to terminate the auto logging when all or any of data loggings
is stopped.
Set whether or not to terminate the auto logging after the specified period of time
has elapsed after start of data logging.
Set a time value for auto logging termination when "Complete with timer" is
selected.
Page 75, Section 7.2) by inserting an SD memory card.
[Auto logging setting]
Description
-
Setting range
-
-
-
-
1 to 86400 seconds