Chapter 8 How To Use The Configuration Tool; Setting Flow Chart - Mitsubishi Electric MELSEC-L Series User Manual

CHAPTER 8
This chapter describes the setting procedure and operations for data logging.
8.1

Setting Flow Chart

Follow the flow chart below to configure the settings.
Stop the data logging.
HOW TO USE THE CONFIGURATION
TOOL
Start
Configure the data logging settings.
No
Enable auto logging?
Yes
Configure the auto logging settings.
No
Is data logging stopped?
Yes
Write the settings.
Start the data logging.
Stop the data logging.
Read the data logging file from the
SD memory card.
Check the CSV file.
End

CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL

Configure the settings required for data logging.
Page 94, Section 8.4
(
Page 114, Section 8.5.1
(
Before writing common settings,
all the data logging must be stopped.
Page 126, Section 8.8
(
Page 126, Section 8.8
(
Execute or stop the data logging.
Page 128, Section 8.9
(
Page 130, Section 8.10
(
)
8
)
)
)
)
)
79