Connection From An Interface Board - Mitsubishi Electric MELSEC-L Series User Manual

2.1.3

Connection from an interface board

The following figure shows configurations of the systems, in each of which the personal computer is connected to a
CPU module using an interface board installed in the personal computer. For applications and installation methods of
the interface boards, and driver installation, refer to the relevant interface board manual.
Personal
computer
TCP connection is recommended when devices are connected on Ethernet. For Ethernet direct connection or UDP
connection, it takes time to process the following:
• Opening the screen of the configuration tool
• Handling a logging file
For specifications of Ethernet communication, refer to the following.
MELSEC-L CPU Module User's Manual (Built-In Ethernet Function)
CC-Link Ver.1 board
+
A80BD-J61BT11
A80BD-J61BT13
CC-Link Ver.2 board
+
Q80BD-J61BT11N
Ethernet board
(Supplied with commercially
+
Built in personal computer
or commercially available
CHAPTER 2 SYSTEM CONFIGURATION
Driver
(SW4DNF-CC-LINK-B)
Driver
(SW1DNC-CCBD2-B)
Driver
available Ethernet board)
CPU module
(another station)
CPU module
(another station)
CPU module
(another station)
27
2