Logging Status And Operation - Mitsubishi Electric MELSEC-L Series User Manual

8.10

Logging Status and Operation

Data logging is executed or stopped, and the status can be confirmed.
(1) Operating procedure
1.
Open the "Logging status and operation" dialog box.
[Online]
2.
Select the target setting number(s). (Multiple choice available)
3.
With the
settings are selected.)
4.
Click the
button to stop. (Simultaneously executable when multiple settings are selected.)
● Data logging does not start only by turning off the power and then on or resetting after writing the configuration. To start
the data logging, be sure to click the
● For trigger logging, a data logging setting cannot be registered if the trigger conditions are met at the time of registration.
● New data logging cannot be started when the logging status is as follows:
• Executing
• Saving the logging data
• Completed
• Pausing
• Error (other than registration errors)
● It takes time to stop or temporarily stop a data logging after the stop or pause operation is performed from the
configuration tool. (After the stop or pause operation, logging actually stops or pauses when saving the data in the buffer
to the SD memory card is completed.)
● If a remote password entry screen appears, enter the configured password.
For the remote password, refer to the following.
MELSEC-L CPU Module User's Manual (Function Explanation, Program Fundamentals)
130
[Logging Status and Operation]
button, start the data logging. (Simultaneously executable when multiple
button to temporarily stop the data logging, and click the
button in the "Logging status and operation" dialog box.