– Mount the extractor and pull off the flywheel.
– Take the woodruff key out of the crankshaft.
!
!
CAUTION
N
.
EVER USE A HAMMER OR A SIMILAR TOOL ON THE FLYWHEEL
1
– Remove the 3 screws
and take off the base plate.
1
1
5
3.3 Engine sprocket
– Remove the Seeger circlip and the washer behind the circlip and pull the engine
sprocket off the countershaft.
2
– Pull the flywheel rubber
off.
2
3
– Remove screw
and take off the chain securing guide.
3
3.4 Cylinder head, cylinder
– Twist out the spark plug.
– Undo the 4 hexagon nuts and remove the cylinder head with cylinder head gasket.