Piston; Kickstarter - KTM S5-E Repair Manual

6
2
3
4
1
5
– Lift the cylinder off the studs.
N : W
OTE HEN REMOVING THE CYLINDER MAKE SURE THAT THE PISTON DOESN

3.5 Piston

– Place the piston on the wooden fork.
– Remove the piston pin locking devices and push the piston pins out of the piston
without applying force.
– Remove the piston.
– Take the piston pin bearing out of the conrod eye.

3.6 Kickstarter

1
– Remove screw .
– Hold the kickstarter and remove the kickstarter stop screw
– Release the kickstarter spring by releasing the kickstarter.
– Unhook the kickstarter spring
4
– Take the plastic cap and the kickstarter spring
'
2
.
3
and pull the kickstarter off the kickstarter shaft.
5
off the kickstarter shaft.
.
T HIT THE HOUSING