Gear Oil; Installing The Engine - KTM S5-E Repair Manual

5.11 Gear oil

7
– Mount the drain plug with a new seal ring and tighten with 10 Nm (7.5 ft.lb.).
7
8
– Remove the filling plug on the clutch cover and fill in 0.25 l gear oil SAE 80.
8
18

6.0 INSTALLING THE ENGINE

– Carry the engine into the frame.
– Mount and tighten the engine bracket screws.
– Mount carburetor.
– Mount chain and fix it with master link.
– Connect cable of short circuit button.
– Mount fuel tank, subframe and seat.
– Test ride.