Installation; Installing The Display Unit - Furuno MU-200 Operator's Manual

1 INSTALLATION

Refer to the outline drawing at the end of the manual for mounting dimensions.
Note: The LCD is made of glass. Handle it with care.

1.1 Installing the Display Unit

The display unit is designed to be flush mounted in a console. When selecting a mounting
location, keep in mind the following points:
Locate the unit out of direct sunlight.
Select a location where the display can be easily viewed and the controls can be easily
operated.
Leave sufficient space around the unit for servicing and maintenance. See the outline
drawing for recommended servicing space.
The unit weighs 50.7 lbs (23 kg). Be sure the mounting location is strong enough to
support the weight of the unit.
Locate the unit away from areas subject to water splash and rain.
Procedure
1. Using the paper template supplied in the installation materials, make a cutout in the
mounting location. (Modification of the LCD may be necessary depending on equipment
used. See the table on page iv and "Modification for Switching from Landscape to
Portrait Orientation" in the Appendix for details.)
2. Pull the display unit cover toward you to detach it.
CAUTION
Hold the cover and display unit
together.
The display unit may fall if only the cover
is held.
Cover
Display unit and cover
1
Display Unit