Modification For Switching From Landscape To Portrait Orientation - Furuno MU-200 Operator's Manual

Modification for Switching from Landscape to Portrait
Orientation
To use the MU-200C with the FCV-1200 series, it is necessary to turn the LCD assembly
180°.
1. Place the display unit on a workbench with the LCD side down.
2. Unfasten ten screws, four sets of connector spacers, and two nuts of waterproofing
connectors to remove the cover near the power section and connectors.
POWER Section
CONE Board 10P6877
Display unit, rear view
AP-4