Furuno MU-200 Operator's Manual page 10

3. Fasten the display unit to the mounting location with eight tapping screws (5X30).
Note: Hex head bolts may also be used to fasten the display unit. However, their length
must be at least 30 mm.
±
501 0.5 ±
440 0.5
±
±
422 1
483 1
±
346 0.5
226
49 113
115 100
45
115 100
Unit: mm 45
Unit: mm
Mounting dimensions for landscape orientation Mounting dimensions for portrait orientation
Mounting dimensions
4. Reattach the cover.
5. For the portrait model only, attach the FURUNO logo seal (supplied) at the top left
corner. (Remove the logo seal at the bottom left corner.)
2