Furuno MU-200 Operator's Manual page 30

14. Fix the rear cover with 14 screws (M4X8). (Torque: 1.47 ±0.15 Nm; 15 ±1.5 kgm)
15. Temporarily fasten the cover near the power section/connectors with 10 screws (M3X8).
16. Fix four connector spacers. (Torque: 0.39 ±0.04 Nm; 4 ±0.4 kgm)
17. Fasten inner six screws (M3X8) for the cover near power section/connectors. (Torque:
0.78 ±0.08 Nm; 8 ±0.8 kgm)
18. Fasten two waterproofing nuts. (Torque: 0.76 ±0.02 Nm; 7.8 ±0.2 kgm)
19. Fasten the remaining four screws for the cover near the power section/connectors.
(Torque: 0.78 ±0.08 Nm; 8 ±0.8 kgm)
20. Attach FURUNO logo seal to top left corner of the display unit.
AP-10