Creating / Altering Seam Programs - Pfaff 3519-5/01 Instruction Manual

Input
11

Creating / altering seam programs

.02
A distinction is made between three different seam types when creating or altering the
seam programs:
● Single-point darts
● Double-point darts
● Tapered darts
The seam program input is accessed by selecting the desired seam type.
● Switch the machine on.
● Call up input mode.
● Call up seam program input.
46
L3 = L4; program numbers 0 - 199
L3 < 4.5 mm; is not cut, program numbers 200 - 299
L3 < L4; program numbers 300 - 399
Table edge
Waist length L2
Starting stitch
condensation or start
backtack
Fig. 11 - 01
Uncut material fold
Dart length L1
Outer fabric edge
End stitch condensation
length L5
L1
CORR