Error Message - Brother P-touch QL-700 Service Manual

Hide thumbs Also See for P-touch QL-700:
Table of Contents

Advertisement

4.4 ERROR MESSAGE

A list of the error messages that are indicated on the printer monitor is shown below:
Error Messages
No Errors
A roll of labels or tape is not
installed.
No paper
Buffer full error in Brother QL.
Brother QL tape cutter is not
operating.
Cannot change the roll of la bels
or tape while printing.
The roll of labels or tape inside
the machine does not matches
the one selected in the
application.
Cover open.
Connected Brother QL is not
Brother QL-700.
Paper cannot be fed.
(There may be no more paper.)
Communication error between
PC and Brother QL.
None
Install into the Brother QL the roll of labels or tape
indicated in the print monitor.
Install a new roll of labels or tape into the Brother QL, and
then click [Resume] in the print monitor.
Turn the Brother QL off and then on. Click [Resume] in
the Brother QL monitor screen.
1. Before removing any jammed labels, turn off the
Brother QL.
2. Remove the jammed labels, and then try printing
again.
Turn the Brother QL off and then on.
Click [Resume] in the Brother QL monitor screen.
Option 1.
Install the correct roll of labels or tape into the machine
and then click on [Resume] to continue to print.
Option 2.
Click [Cancel] to cancel print job.
Change the paper setting in the application so that it
matches the media loaded in the machine. Then, try
printing again.
Close the cover.
Connect the correct model.
First check that the paper is not empty.
<If the paper is empty>
Install a new roll of labels or tape into the Brother QL, and
then click [Resume] in the print monitor.
<If the paper is not empty>
Check the paper to ensure it is loaded correctly. Make
sure that the label path is not blocked.
Then press on [Resume] to continue to print.
1. Check that the Brother QL is connected to your
computer with the USB interface cable (that comes
with the Brother QL). Also check the cable for weak
connection.
2. Make sure that the Brother QL is turned on. If any
communications error has occurred, turn the Brother
QL off and then on.
IV - 4
Advices

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents