Brother P-touch QL-700 Service Manual page 104

(3) "P-touch Editor Lite" (Editor) is started. When the media is not set into the
machine, set it and select the media in the Editor side. (The free length tape
(62mm (2.4")) is set in here.)
If click the [Check Media] button, detect the installed media.
If the media is different, select the media by the right
drop-down arrow.
(4) Enter the arbitrary data for the "operation check", and click the [Print] button.
(5) The "Sending the print data to the machine" screen is displayed. If the sending
data is completed, the screen is closed. And perform the printing. Check whether
the print result is same as the input pattern.
Fig. 32 "P-touch Editor Lite" screen
After entering the data,
click the [Print] button to print.
Fig. 33 "P-touch Editor Lite" (Print)
Fig. 34 Sending print data
1 - 21