Installing The Main Pcb Assy And The Power Supply Assy - Brother P-touch QL-700 Service Manual

[9]

Installing the Main PCB ASSY and the Power supply ASSY

(1) Attach the insulating sheet S into the boss of the under cover as shown in the
figure below.
Insulating sheet S
Boss
Fig. 3.5-27 Installing the Main PCB ASSY and the Power supply ASSY (1)
(2) Assemble the ground spring plate, the FG harness ASSY and the main PCB
ASSY onto the under cover with the four screws.
Ground spring plate
Main PCB ASSY
Fig. 3.5-28 Installing the Main PCB ASSY and the Power supply ASSY (2)
Screws
FG harness
ASSY
III - 45
Under cover
Screws
Boss
Under cover
FG harness
ASSY