Removing The Panel Cover - Brother P-touch QL-700 Service Manual

[5]

Removing the Panel Cover

(1) Turn the machine upside down.
(2) Remove the two screws.
(3) Pull up the section "A" of the panel cover, and remove the panel cover to the
direction of the arrow from the upper cover.
Section "A"
Panel cover
Hook
(4) Turn the panel cover upside down.
(5) Remove the two screws, and then remove the SB PCB ASSY from the panel
cover.
Panel cover
Fig. 3.4-16 Removing the Panel Cover (1)
Fig. 3.4-17 Removing the Panel Cover (2)
III - 14
Hook
Screws
SB PCB ASSY
Screws
Upper cover