Brother P-touch QL-700 Service Manual page 58

(7) Pass the link lever through the hole of the upper cover, and then hang the hooks
on the under cover to assemble the upper cover onto the under cover.
(8) Secure the upper cover with the two screws A and the five screws B.
NOTE: The screws A are screw, bind M2.6x4. The screws B are taptite, bind B
M2.6x8.
Screws B
Hook
Under cover
Fig. 3.5-21 Reassembling the Upper Cover and the Under Cover (6)
Screws A
Screws B
Hook
III - 40
Upper cover
Upper cover
Hole
Link lever