Reassembling The Panel Cover - Brother P-touch QL-700 Service Manual

[3]

Reassembling the Panel Cover

(1) Assemble the shaft unit of the cover sensor arm onto the section "A" of the panel
cover.
Panel cover
(2) Assemble the LED guide, the feed button and the power button onto the panel
cover.
Panel cover
Cover sensor arm
Fig. 3.5-10 Reassembling the Panel Cover (1)
Power button
Fig. 3.5-11 Reassembling the Panel Cover (2)
III - 33
Shaft unit
Section "A"
Feed button
LED guide