Media And Cover Sensors Check - Brother P-touch QL-700 Service Manual

1.4.5

Media and cover sensors check

Check that the media sensor and cover sensor work correctly.
(1) Change the background of "Media and cover sensors check" item into yellow with
the [Up] / [Down] buttons or the [ ↑] / [ ↓] keys on the keyboard. And then click
the [Run] button.
NOTE: When the machine is entered in the inspection state, the Status LED
(2) The following message is displayed if in the state that the media sensor is pushed
at the starting time of the inspection. (It is not displayed in the state of the normal
procedure.)
When the media sensor is released, shift to the next state.
NOTE: When the message is displayed even if nothing touches the media
(3) If the following message is displayed, push all media sensors.
It is not necessary to push them one by one in turn.
NOTE: Click the [NG] button, when finishing the inspection on the way for the
NOTE: The media sensors display "Done" in the state that released the sensors
does not change even if open and close the top cover ASSY.
Fig. 20 Starting "Media and cover sensors check"
sensor, finish the inspection by clicking the [NG] button.
Fig. 21 During "Media and cover sensors check"
cause that the sensor does not work.
after checking "ON".
1 - 14