Arc466A70 - Daikin FTXM-V Series Service Manual

ARC466A70

2. ARC466A70
Signal transmitter
• To use the remote controller, aim the
transmitter at the indoor unit. If there is
anything blocking the signals between
the unit and the remote controller,
such as a curtain, the unit may not
operate.
• The maximum transmission distance
is about 23 ft (7 m).
FAN setting button
• Selects the airflow rate setting.
Auto Indoor unit quiet
High Middle high
• When the airflow is set to "
indoor unit quiet operation will
start and the noise from the unit
will become quieter.
• In indoor unit quiet operation,
operation sound becomes weak.
(The airflow rate also decreases.)
• In DRY operation, the airflow rate
setting is not available.
Reference
Refer to the following pages for details.
1 POWERFUL Operation
2 Wireless LAN Connection
78
Receiver
Low
Middle low
Middle
" ,
< ARC466A70 >
Display (LCD)
• Displays the current settings.
(In this illustration, each section is
shown with all its displays on for the
purpose of explanation.)
TEMPERATURE
adjustment buttons
• Changes the temperature setting.
∗ STD : Indoor temperature at the time
ON/OFF button
• Press this button once to start
operation.
Press once again to stop it.
POWERFUL
Wireless LAN
(push 5 seconds)
• Starts POWERFUL operation.
• Wireless LAN connection.
P.42
P.53
SiUS042113E
64 ~ 86˚F
: AUTO
(18.0 ~ 30.0˚C)
STD ~ (STD–5˚F)
: DRY
(STD~(STD−3.0°C))
64 ~ 90˚F
: COOL
(18.0 ~ 32.0˚C)
50 ~ 86˚F
: HEAT
(10.0 ~ 30.0˚C)
: FAN Not available
when the Dry operation is
started.
1 button and
2
button
Part 5 Remote Controller