Clean Operation - Daikin FTXM-V Series Service Manual

SiUS042113E

1.17 CLEAN Operation

Outline
The CLEAN function dries the interior of the indoor unit to reduce the amount of condensation
present. When COOL or DRY operation is performed, condensation may occur inside the air
conditioner. It is recommended to dry the inside of the air conditioner using CLEAN operation.
Details
 To operate automatically
1. Press and hold Menu (push 2sec) button for 2 seconds.
2. Press Select ▲ or Select ▼ button to select menu number 2.
3. Press Menu (push 2sec) button to confirm the select setting.
4. Press Select ▲ or Select ▼ button to change the setting as follows:
5. Press Menu (push 2sec) button again.
6. Press Cancel to return to the default screen.
Note(s)
Note on CLEAN setting
The display automatically returns to the default screen after 60 seconds. To return to the default
screen sooner, press Cancel button twice.
Notes on CLEAN operation
 When you want to stop CLEAN operation midway, press ON/OFF button twice.
 After DRY or COOL operation stops, the air conditioner starts CLEAN operation automatically,
 This operation dries the inside of the air conditioner using FAN operation and HEAT operation.
 The CLEAN function dries the interior of the indoor unit to reduce the amount of condensation
 CLEAN operation is not available when the unit is turned off using the OFF TIMER or turned off
 The flaps may sometimes close to increase the drying effect inside the air conditioner.
 CLEAN operation automatically dries the inside of the air conditioner each time after COOL and
 CLEAN operation may not be performed if the COOL or DRY operation time is short.
 If CLEAN operation does not suit your preference, set operation to "OFF".
Part 4 Functions and Control
Mold proof icon appears and 2 blinks.
Automatic operation is disabled
Automatic CLEAN operation will be enabled or disabled according to the chosen setting.
If automatic CLEAN operation is enabled, CLEAN icon appears on the LCD and the CLEAN
PROOF lamp lights green when CLEAN operation is in progress.
and then stops automatically 140 minutes later.
The indoor temperature and humidity may not suit your preferences.
present.
using a smartphone.
DRY operation is stopped.
Automatic operation is enabled
(default)
Display
Main Functions
R4003797
R4003798
51