SiUS042113E
Note(s)
For dry operation, the temperature cannot be set with a remote controller, but the target
temperature is shifted internally.
Notes on Energy saving operation
If no presence detected in the room for 20 minutes, the energy saving operation will start, and
This operation changes the temperature by –3.6°F (–2.0°C) in HEAT / +3.6°F (+2.0°C) in COOL
This operation decreases the airflow rate slightly in FAN operation only.
Notes on INTELLIGENT EYE operation
Application range is as follows.
The air conditioner may switch to the energy-saving operation even if there are people in the
The sensor could also mistakenly detect pets, sunlight, fluttering curtains and light reflected off
The sensor may not detect moving objects further than 23ft (7m) away. (Please see the
Sensor detection sensitivity changes according to the indoor unit location, the speed of
NIGHT SET mode will not switch on during use of INTELLIGENT EYE operation.
Part 4 Functions and Control
the INTELLIGENT EYE lamp goes off.
If human movement is detected again, the INTELLIGENT EYE lamp lights up and energy
saving operation terminates.
/ +3.6°F (+2.0°C) in DRY operation from the set temperature.
When the room temperature exceeds 86°F (30.0°C), the operation changes the temperature by
+1.8°F (+1.0°C) in COOL / +1.8°F (+1.0°C) in DRY operation from the set temperature.
Vertical angle 90°
(Side view)
areas.
This may occur depending on the clothes the people are wearing, if there is no movement of the
people in the areas.
of mirrors as passers-by.
application range)
passers-by, temperature range, etc.
Horizontal
angle 110°
55° 55°
(Top view)
90°
Main Functions
41