Check
5.13 Capacitor Voltage Check
Check No.21
Before this check, turn the circuit breaker off and wait for 10 minutes for prevention of electric
shock.
09/12 class
18/24 class
To prevent an electrical shock, use a multimeter to check that the voltage between FU2 and
The surface of the test points (FU2, DC–) may be covered with the coating. Be sure to make
144
To prevent electrical shock, use a multimeter to check that the voltage between DC_P2 (+)
and DC_N2 (–) is 50 V or less.
DC– is 50 V or less.
firm contact between the multimeter probes and the test points.
Multimeter probe
Coating
FU2
DC–
SiUS042113E
PCB
Part 6 Service Diagnosis
R6000792
R6000790