Upper Heater Assembly; Vent Motor Assembly - GE Advantium 240 Technical Service Manual

https://appliancetechmanuals.com

Vent Motor Assembly

The vent motor assembly helps remove heat
from all components. The vent blower comes on
during Speedcook and after using convection
cooking. At the end of Speedcooking, or after using
convection cooking, the vent blower will operate
for approximately 1 minute and the display will
read "OVEN IS COOLING." The vent blower will
automatically shut off when the internal parts of the
oven have cooled.
The exhaust motor has an approximate resistance
value of 14 Ω.
To remove the exhaust motor assembly:
1. Remove the oven from cabinet or wall opening
and remove the outer cover. (See
)
.
Partial Removal
2. Disconnect the wires from the exhaust motor.
Disconnect
Disconnect
3. Remove the 6 Phillips-head screws and the
exhaust motor assembly from the oven chassis.

Upper Heater Assembly

Each halogen heater has an approximate resistance
value of 1.8 to 3.7 Ω. The outer heater is connected
with 2 red wires and the inner heater is connected
with 2 white wires.
To remove the upper heater assembly:
1. Remove the oven from cabinet or wall opening
and remove the outer cover. (See
Partial Removal
2. Disconnect wires from the 2 halogen TCOs.
3. Remove 4 Phillips-head screws that attach the
TCO bracket and straighten the 2 folded lock
tabs.
Oven Removal /
4. Pull the top of the vent motor assembly down
and outward and lift off the TCO bracket.
5. Disconnect the heater assembly wire harnesses
and pull them through the wire guide.
– 38 –
Oven Removal /
)
.
Tab
Disconnect
Disconnect
Tab
Disconnect
Disconnect