Lower Heater Assembly - GE Advantium 240 Technical Service Manual

https://appliancetechmanuals.com

Lower Heater Assembly

The lower ceramic heater has an approximate
resistance value of 27 to 42 Ω.
To remove the lower heater assembly:
1. Remove the oven from cabinet or wall opening.
(See
Oven Removal / Partial Removal
2. Remove the 2 Phillips-head screws from the
bottom of each side of the outer cover.
3. Remove the 6 Phillips-head screws that attach
the bottom to the oven.
Side Screw
Side Screw
4. Disconnect the bottom heater and turntable
wire harnesses.
5. Remove the 4 Phillips-head screws and the
refl ector from the oven chassis.
6. Remove the single Phillips-head screw that
holds the heater assembly to the oven chassis.
)
.
Side Screw
Side Screw
Caution:
turntable wiring, be sure wiring is placed inside the
wiring cut-out in the chassis before installing oven
bottom.
– 40 –
Bottom View with Baseplate Removed
Heater
Screw
Refl ector
Screws
Wire Harness
To prevent damage to the heater and
Wiring
Cut-out