Exmark ULTRAVAC BAGGER 126-6954 Setup Instructions page 11
Hide thumbs
Also See for ULTRAVAC BAGGER 126-6954:
- Operator's manual (24 pages) ,
- Setup instructions (9 pages)
Advertisement
1. Drill
2. #10 washer
2.
Place the #10 washer and lanyard cable end onto
the #10-24 x 3/4 inch hex screw and install into the
RH ROPS hole.
3.
Install the ROPS pin.
4.
Repeat steps 1 through 3 for the LH ROPS.
Fill Out Warranty Registration
Form
Fill out the online warranty registration form.
Figure 25
3. #10-24 x 3/4 inch hex
screw
4. ROPS pin with lanyard
g038069
11
Advertisement
