Table of Contents
Advertisement
Quick Set Command / Menu Item
0+
1+
2+
3+
4+
10+
11+
12+
13+
14+
15+
16+
17+
20+
Note:
You can access any quick set feature by entering the menu number and pressing
When a selection is made, the Quick Set menu automatically closes. To close the menu without
making a selection, press
AD Up-the-Coax (UTC) Command Summary
: Toggle Quick Set Menu
: Dome Config Menu
: Auto Iris/Auto Focus
: Flip
: Peel Pattern
: Night Mode
: Day Mode
: Auto/Day Night Mode
: WDR On
: WDR Off
: Smooth Scan
: Stepped Scan
: Random Scan
: Dome Information
.
Description
Toggles between displaying and hiding the quick set menu.
Displays the SpeedDome Ultra configuration menu. Refer to
the dome manual for information about the available
settings.
Resumes Auto Focus/Auto Iris mode.
Rotates the SpeedDome 180° from its current pointing
direction. This is the same as pressing the Flip button.
Runs the default Apple Peel Pattern continuously.
Sets the dome IR mode setting to ON. The dome switches to
full-time black-and-white (B/W) mode.
Sets the dome IR mode setting to OFF. The dome switches
to full-time color mode.
Resumes the most recently selected automatic IR mode
setting.
Auto High: B/W mode activates ~30 lux.
Auto Mid: B/W mode activates ~3 lux.
Auto Low: B/W mode activates ~ .5 lux
Enables Wide Dynamic Range (WDR). Use this setting
when both bright and low light areas need to be viewed
simultaneously.
Disables Wide Dynamic Range (WDR). Use this setting
when the light level is constant or changes in lighting
conditions are gradual.
Initiates a smooth scan between the left and right scan
limits, starting at the left scan limit. If no scan limits have
been set, initiates a smooth 360° clockwise rotation around
the dome axis using the current tilt, zoom and focus settings.
Initiates a scan between the left and right scan limits pausing
briefly every 10° (at 1x zoom), starting at the left scan limit.
When the right scan limit is reached, the scan is reversed. If
no scan limits have been set, initiates a clockwise rotation
around the dome axis pausing briefly every 10° (at 1x zoom)
for 3 seconds using the current tilt, zoom and focus settings.
Initiates a scan between the left and right scan limits pausing
randomly between the limits. If no scan limits have been set,
initiates a clockwise or counter-clockwise rotation around
the dome axis using the current tilt, zoom and focus settings.
The dome pauses randomly as it rotates around the axis.
Displays the Dome Information screen available through the
dome configuration menu.
.
E–5
Advertisement
Table of Contents
