Table of Contents
Advertisement
Exiting the Configuration Utility
Under SensorNet, RS-422, and Manchester protocols, you may save your changes and exit the utility
from any screen by pressing and holding Iris Close, then pressing Focus. From the Dome
Configuration Menu, you have two choices for exiting the utility: Exit and Save Changes or
Quit Without Saving. Use the Pan/Tilt control to move the highlight bar up and down on the
screen.
• If you want to keep the changes you made, move the highlight bar to Exit and Save Changes,
and select. The utility closes.
• If you want to exit without making changes, move the highlight bar to Quit Without Saving,
and select. The following prompt appears on the screen:
Press Zoom to display the options.
•
To cancel the changes, select Yes.
•
To keep the changes, select No. If you choose No, the Dome Configuration Menu is displayed.
Press Focus to accept the displayed option.
Accessing the Quick Set Menu
SpeedDome Ultra VII Day/Night provides a Quick Set Menu for commonly used features and
functions when used with compatible controllers. This allows you to change or activate features
without starting the dome configuration menu. Two pages of menu options are available.
0
1
2
3
4
10
11
12
13
14
FOCUS FAR = next page
To access a feature on the menu, enter the number and press the Quick Set button (varies by
controller). To display the different pages of the menu, press Focus Far or Focus Near. The
following table provides a description of the available options.
Using the Dome Configuration Utility
Data Not Saved. Quit Anyway?
I M P O R T A N T
The following settings do not restore when selecting Quit Without Saving from the
Dome Configuration Menu: Area Boundaries and AGC/Shutter Limit.
TOGGLE QUICK SET MENU
DOME CONFIG MENU
AUTO IRIS/AUTO FOCUS
FLIP
PEEL PATTERN
NIGHT MODE
DAY MODE
AUTO DAY/NIGHT MODE
WDR ON
WDR OFF
No
15
SMOOTH SCAN
16
STEPPED SCAN
17
RANDOM SCAN
20
DOME INFORMATION
FOCUS NEAR = previous page
1–5
Advertisement
Table of Contents
