American Dynamics SpeedDome Ultra VII RAS917LS Configuration page 79

Supported Controllers and Matrix Switching Systems
This section provides information about the SensorNet and RS-422 controllers and matrix switchers that are
compatible with SpeedDome Ultra VII Day/Night. Refer to the controller information for details concerning specific
functions supported.
Note: This list of controllers is complete as of the time of publication. Other controllers may be
supported. Contact your Sales Representative for current information.
Controller/Switcher
•
VM8
•
VM16/ADTT16
•
VM16E/ADTT16E
•
VM32/AD32
•
VM96
•
AD2150/AD2350
VM8
Supported Protocol
Maximum Presets
(1)
Maximum Patterns
Quick Set Menu
Address Range
Notes:
(1) Apple Peel only. Programmable patterns are not
available.
VM16/ADTT16 (White Touch Tracker)
Supported Protocols
Maximum Presets
(2)
Maximum Patterns
Quick Set Menu
Address Range
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns cannot
exceed 99.
SensorNet and RS-422 Command Summary
Page Number
A-3
A-3
A-3
A-4
A-4
A-4
SensorNet
0
1
Not supported
1-8
SensorNet
(1)
RS-422
96 – SensorNet
4 – RS-422
3
Not supported
1-16
Controller/Switcher
•
AD1650
•
AD168
•
AD2050
•
MegaPower LT
•
MegaPower 48
•
MegaPower 1024
VM16E/ADTT16E (Black Touch Tracker)
Supported Protocols
Maximum Presets
(2)
Maximum Patterns
Quick Set Menu
Address Range
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns cannot
exceed 99.
(3) Requires firmware version 0701-2833-0103
(EEPROM) / 0701-2834-0201 (Flash PROM) or
newer.
Page Number
A-4
A-5
A-5
A-5
A-5
A-5
SensorNet
(1)
RS-422
96 – SensorNet
4 – RS-422
3
(3)
Yes
1-16 or
(3)
1-64
A–3